FAQ

Slowly pull it apart. Do NOT pull aggressively may cause other areas of the design the adhesive to itself. You do not want to stretch the vinyl it will compromise the shape of initial design.

Once vinyl is stretched the design will never lay flat. You can make a small incision where the stretch mark occurs to try to get the image to lay flat. I will be posting a tutorial video shortly on the website to help to help troubleshoot this if it ever happens.

Bring design to desired location. Start by pressing the head of the mermaid attaching firmly to poolside. Let the design lay itself out. Move down slowly be sure to work out air bubbles as you work your way down. Once the head and hair are attached then move down the body smoothly press out the arms and lower body working your way to the tip of the tail. Once the top is securely attached the lay out of the tail will be tailored for the proper application. Again, be sure to work out all the air bubbles as you apply in one fluid motion, ideally using the application/removal tool.

Bring design to desired location. Start by pressing the dorsal fin, attaching firmly to poolside. Let the design lay itself out. Move down to bottom dorsal fin attaching firmly while working the air bubbles out. Once dorsal fins are attached move outwards attaching the body slowly in one fluid motion working out air bubbles. Be sure to add the application/ removal tool to assist you working out any imperfections or air bubbles.

Bring design to desired location. Start by pressing the top edge of dolphin and top of the dorsal fin. Work your way down slowly attaching firmly to the poolside while working out any air bubbles along the way. Be sure to add the application/ removal tool to assist you working out any imperfections or air bubbles.

Start at the top edge and slowly work down or for better quicker results use the application tool.

Absolutely! These designs can be applied to any DRY, flat non-porous surfaces including but not limited to glass, metal, plastics, tiles, rubber, etc. To apply clean surface with rubbing alcohol. Make sure the area is fully clear of debris and dirt before placing design. Attach from top edge image working your way slowly down or out in one fluid motion working out air bubbles along the way. Be sure to add the application/removal tool to your order to assist you with working out any imperfections or air bubbles.

Firmly attach the top edge of design using your fingers. Once attached take the tool move it slowly down (then out for shark or fish design) in one fluid motion working out air bubbles and/ or imperfections along the way.

Gently apply pressure to the edge of design until you get an edge up. Use your fingers to peel
the edge then insert tool under design slowly peeling and edging the tool further under design assisting you in the removal. DO NOT rip design off aggressively to ensure no damage occurs to surface. If the design doesn’t come off in one piece apply the same process for any material left over.

14-day return policy (14 days from date of delivery). Item must be unused in same condition as it was received attached to original backing in original packaging with proof of purchase.

To start a return, use the contact us section on the website or email Tommy@SplashArtDecor.com
If packing is damaged during shipping please contact us immediately.

USPS First Class
USPS Priority
USPS Priority Express

Yes, write to us using the contact section of the website. Additional charges will incur depending on size, shape, time frame, shipping cost, etc.